Metalworking Lubricants 

Metalworking Lubricants

 

The following is a partial list of products available from NOCO Lubricants Company.  If you do not find a particular product for your application, please call 1-800-414-6626.

Straight Cutting Oils

NOCOcut straight cutting oils are a new series of environmentally friendly metalworking fluids incorporating advanced polymeric additives eliminating the need of chlorine.

NOCOcut L - Light colour, transparent, low odour inactive straight cutting oil designed for high surface speed machining of screw machine stock, aluminum, brass, copper and its alloys. Suitable for light duty grinding, turning, deep hole drilling and milling.

~ Available in two grades L-1, 33 cSt and L-2, 48 cSt.
~ Available in 18.9 litre pail, 208 litre returnable drum and bulk delivery.

 

NOCOcut M - Light colour, transparent, low odour inactive straight cutting oil designed for broaching, threading, turning, tapping, gear hobbing and cutting, milling, drilling and cold heading. Suitable for use on ferrous and non-ferrous metals.

~ Available in two grades M-1, 33 cSt. and M-2, 48 cSt.
~ Available in 18.9 litre pail, 208 litre returnable drum and bulk delivery.

NOCOcut H - Developed as a heavy duty metalworking fluid containing the latest technology in active and non-active additives as well as superior lubricity agents. Designed for use in heavy duty gun drilling, broaching, gear hobbing, tapping, threading, turning, grinding and milling operations.

~ Available in two grades H-1, 31 cSt and H-2, 45 cSt.
~ Available in 18.9 litre pail and 208 litre returnable drum.

NOCOcut SH - Especially developed as a super heavy duty metalworking fluid. Designed for use whenever hard to machine metals are encountered.

~ Available in two grades SH-1, 32 cSt and SH-2, 46 cSt.
~ Available in 18.9 litre pail, 208 litre returnable drum and bulk delivery.


Soluble Cutting Oils

NOCOsol HDCF - Is a new generation chlorine free heavy duty soluble oil designed for use on most machining and grinding operations. NOCOsol HDCF uses a combination of advanced polymeric additive and lubricity agents as well as an effective biocide that provides longer coolant and tool life and better surface finish when compared to conventional soluble oils. Designed for use between 5% and 10% concentration depending on the severity of your application.

~ Available in 18.9 litre pail and 208 litre returnable drum.


NOCOcool EP - Is a cost effective fully synthetic soluble metalworking fluid ideal for operations demanding excellent cooling, lubricity and extreme pressure capability. Ideal for high speed operations and low speed heavy cuts.

~ Available in 18.9 litre pail and 208 litre returnable drum.


NOCOcool Blue - Is a true synthetic coolant formulated primarily for grinding operations on both ferrous and non-ferrous metals. Its pale blue transparent colour ensures excellent workpiece visibility. It has excellent detergency to keep wheels open and free cutting. This property, combined with an effective level of lubricity for cushioning the wheel, provides longer wheel life, better finishes and reduced burn formations. NOCOcool Blue is formulated with corrosion inhibiting properties which are resistant to microbial induced spoilage as well as an effective biocide to extend coolant life.

~ Available in 18.9 litre pail and 208 litre returnable drum.

 


coverage map